IPD (ICOUNT PARTICLE DETECTOR)
Online Ordering Support
Thiết Bị Phân Tích Hạt Thải Rắn Trong Dầu Thủy Lực Bằng Công Nghệ Laser
Parker Hannifin đã nghiên cứu và ứng dụng thành công công nghệ Laser trong việc phân tích hạt thải rắn có trong chất lỏng nhằm đem lại hiệu quả và độ chính xác cao. IPD (Icount Particle Detector) cực kỳ nhỏ gọn, tiện dụng, tiết kiệm chi phí. Dễ dàng tùy chỉnh độ chính xác, thời gian phân tích, độ nhạy cảm theo yêu cầu.
Tổng quan
• Không rò rỉ, chống thâm nhập
• Công nghệ đã được kiểm chứng sự hiệu quả với nhiều mức độ ô nhiễm khác nhau
• Ứng dụng kỹ thuật phân tích Light Obscurasion (Chất lỏng chảy qua vùng quang điện tử từ laser. Các hạt thải rắn trong chất lỏng có thể làm ánh sáng bị hấp thụ, khúc xạ hoặc tán xạ theo 1 góc nghiêng)
• Khả năng liên tục phân tích 24/7
• Tiêu chuẩn chất lượng ISO4406:1999; NAS1638
Tính Năng
•Local display with power and alarm outputs: 0-3, 0-5, 4-20mA or J1939 CANBUS
• M12 or Deutsch Connections
• 9 – 40 Volt power supply
• Up to 500 cSt rating
• Bi Directional flow cell
• IP66 rated
• Onboard Moisture sensor option
• Requires flow rate of 40 – 140 ml/min
• Requires minimum pressure of 2 bar
Ưu Điểm
• Tiêt kiệm chi phí
• Dễ dàng tùy chỉnh
• Giảm thời gian bảo dương, bảo hành
• Độ chính xác và hiệu quả rất cao
Thông Số Kỹ Thuật Tham Khảo
Feature | Specifcations |
Product start-up time | 5 seconds minimum |
Measurement period | 5–180 seconds |
Reporting interval | 0–3600 seconds via RS232 communication |
Principle of operation | Laser Diode optical detection of actual particulates |
International codes | ISO 7 – 22, NAS 0 – 12 |
Calibration | By recognised online methods confrmed by the relevant ISO procedures. MTD – Via a certifed primary ISO 11171 automatic particle detector using ISO 11943 principles, with particle distribution reporting to ISO 4406:1996 ACFTD – Conforming to ISO 4402 principles with particle distribution reporting to ISO 4406:1996 |
Recalibration | Contact Parker Hannifn |
Working pressure | 2–420 bar (30–6000 PSI) |
Flow range through icountPD | Note: Flow may be bi-directional 40–140 ml/min (optimum flow 60 ml/min) (0.01 – 0.04 USGPM (optimum flow 0.016 USGPM)) |
Online flow range via System 20 sensors |
Size 0 = 6 to 25 l/min (2–7 USGPM) Size 1 = 24 to 100 l/min (6–26 USGPM) Size 2 = 170 to 380 l/min (45–100 USGPM) |
Ambient storage temperature | –20°C to +40°C (–4°F to +104°F) |
Environment operating temperature |
+5°C to +60°C (+41°F to 140°F) |
Fluid operating temperature | +5°C to +80°C (+41°F to 176°F) |
Computer compatibility | Parker recommends the use of a 9-way D-type connector. This can be connected to a USB port using a USB-serial adaptor. Note that these connectors/adaptors are NOT supplied with icountPD units: contact Parker Hannifn for advice. |
Moisture sensor calibration | ±5% RH (over compensated temperature range of +10ºC to +80ºC; +50ºF to +176ºF) |
Operating humidity range | 5% RH to 100% RH |
Moisture sensor stability | ±0.2% RH typical at 50% RH in one year |
Power requirement | Regulated 9–40Vdc |
Current rating | Typically 120mA |
Certifcation | IP66 rating Refer to the EC Declaration of Conformity (page 2). |
Liên Hệ