Most Up-To-Date Technology In Solid Particle Contamination Analysis

Parker Hannifn’s Icountpd Represents The Most Up-To-Date Technology In Solid Particle Contamination Analysis. The Icountpd Is A Compact, Permanently-Mounted Laser-Based Particle Detector Module That Provides A Cost-Effective Solution To fluid Management And Contamination Control.

The icountPD has just one setting to control the accuracy, stability and sensitivity of the measurements and that is the ‘Measurement Period’. This can be set from fve seconds to 180 seconds. The longer the Measurement Period, the more contaminant is measured, averaging out any spikes seen on a smaller sample. The shorter the Measurement Period the more sensitive the icountPD is to small slugs of contaminant, but also the performance on clean systems can be reduced. Thus, the user can select how sensitive the icountPD is to spikes of contaminant, and how quickly it responds to contamination levels above the set point (‘limits’)
 

Overview

• Permanently installed non intrusive
particle detector
• Proven technology in detecting changing
levels of contamination
• Utilizes Light obscuration technique
• Fit and forget system condition monitoring
• 24/7 continuous detecting (Baby-sitter)
• Multi-standard cleanliness reports

ISO4406:1999
NAS1638

Features

•Local display with power and alarm outputs: 0-3, 0-5, 4-20mA or J1939 CANBUS

• M12 or Deutsch Connections
• 9 – 40 Volt power supply
• Up to 500 cSt rating
• Bi Directional flow cell
• IP66 rated
• Onboard Moisture sensor option
• Requires flow rate of 40 – 140 ml/min
• Requires minimum pressure of 2 bar
 

Benefits

• Cost effective solution to Online Particle Detection
• Easy to read Go – No Go display
• Reduced downtime through predictive maintenance
• Reduced component failure by contaminant control
• Ease of scheduled maintenance
• Awareness of absorbed water contamination (%RH) before saturation occurs

Accurate Condition Monitoring made Quick, Simple and Cost Effective 

The icountOS (IOS) is an innovative solution to the challenge of measuring the quality of hydraulic oils and hydrocarbon fuels in many different applications: from renewable energy, marine and offshore, to manufacturing, mobile, agriculture, military and aerospace. 

How It Works

The IOS quality condition monitor for hydraulic oils and hydrocarbon fuels uses advanced technology to produce extremely repeatable results.
At the heart of the system is a sophisticated laser detector, using a light obscuration flow cell, providing continuous measurement of fluid flow passing through a sample tube.

Measurements are taken every second as standard, although measurement intervals and test period can be defined by the user, with results being reported immediately and updated in real time. Data is displayed on a built-in OLED digital display and can also be stored for subsequent upload via the embedded icount’s web page interface connecting through an RJ45 cable.

Features

Proven laser detecton technology

High onboard test data storage capacity

Quick connection
Tough storm case
Fast contamination detection
Complies with the latest standards
Long life remote operation
Fluid and pressure control
Pressure reducing valve (prv)